#Kodak cloud printing setup registration#

From the Files screen, click on under More.From the Projects screen, click on in the black header.(Optional) Enter the number of times the collaborator can use the printer in the quantity field.Select if you want the collaborator to be able to print directly ( Can print) or if you would like to moderate want they print ( Can queue).

Enter the email address of the collaborator in the entry field saying email.

From the Printers screen, click on the blue SHARE button next to the printer you would like to share.

Press on the Tools button and select Printer Settings.

To remove the printer from the list, do the following on a computer:

#Kodak cloud printing setup registration#

Enter the registration token obtained from the printer, and click OK.Īfter you have unregistered the printer from the cloud it will still appear in your list of printers.

Click on Register a KODAK Portrait 3D Printer.

Once logged in, click on Printers in the navigation bar.

On your computer go to and sign up for a new account or log in with your credentials.

Now you'll be presented with a registration token to be used with the KODAK 3D Cloud.

Follow the on-screen instructions when booting up.

Connect the Portrait 3D Printer via wifi or ethernet cable.

Select a printer and printing will start.

Click on Slice & Toolpath Preview to generate a GCODE file, located inside the project storing extruder and material settings, to preview and to print.

This will override any extruder settings previously set in layout ~ e.g.

To print using a single extruder, select the extruder to use in the drop list and then pick a profile based on the material you are going to use.

For dual extruder projects, select one of the profiles starting with Dual.

Click on the new file's Slice button to prepare the file for printing and select which materials and settings will be used.

A new file will be created within the project if you merged two models together.

Once you are happy with the layout, click on Save.

Models that are going to be printed with Extruder I will be yellow and Extruder II will be green.

To assign model(s) to an extruder, click on the model(s), then Extruder, select an extruder, and then click Apply.To add a model(s) click Add File, select which project to add files from, highlight file and click Apply.If you want the model(s) to be flat on the build surface, be sure to click on On Bed on the right-hand side before continuing. To move model(s), click and drag the model's XY- or Z-selector into the desired place on the build surface.Now click on Layout, next to the file you want to print, to add/position models and to define which extruders to use.This will generate an additional file with _repaired in its filename which you should then use to print. (Optional) You can repair the models to fix any defects in them from the design software. Selected the file(s) you want to upload from your local drive, Dropbox or Google Drive as single files or as a project.Go to and log in with your credentials (instructions to link your printer to the cloud).Dual extrusion is not possible with single STL files. NOTE: To print in dual colors you need to add two (2) STL files to your print job and assign each STL file to an extruder before slicing.